The LT-P1 is a high‑energy‑density LFP battery module purpose‑built for HMT’s LT‑S1 modular battery system. Each LT‑P1 module contains carefully matched cells, an integrated battery monitoring unit (BMU), passive balancing circuitry, and temperature sensors. Multiple LT‑P1 modules are connected in series/parallel and installed inside the LT‑S1 cabinet to form a complete energy storage system. The LT‑P1 cannot supply power independently; it must operate with the LT‑S1 central BMS and structural frame.

核心参数

Product Dimensions

3.47 x 5 x 9.65 in; 15.52 0z

Item model number

s3212/82

Batteries

1 AA batteries required.(included)

Battery Life

60 minutes

UPC

075020086860

ASIN

B0842YHKL3

Batteries

1 AA batteries required.(included)

跳转到参数表

下载参数表

Key Advantages

Lightweight

Over 60% weight reduction vs. lead-acid, improving payload and speed.

5,000 cycles

High-quality LFP cells cut total cost of ownership by 50%.

Plug & play

Standard interface, no dedicated BMS tuning, works with most chargers.

IP67 rating

Fully sealed enclosure, waterproof, dustproof, salt-fog resistant.

Maintenance-free

No fluid refill, no memory effect, lowers daily upkeep.

Multi-layer protection

Built-in over‑temp, over‑current, over‑voltage, and short‑circuit protection.

Custom Service

The LT‑P1 is not sold separately and cannot be used standalone.It is available only as part of the LT‑S1 battery system. If you require battery modules, please inquire about the LT‑S1 system, and we will configure the appropriate number of LT‑P1 modules for your project.

About LT-S1 Batter System

Integration into LT‑S1

-The LT‑S1 cabinet accommodates 4 to 12 LT‑P1 modules (depending on capacity needs).

-Modules are connected in parallel or series via copper busbars, achieving voltage from 48V to 800V.

-The central BMS reads voltage and temperature from each module and controls the main contactors.

-The system provides external high‑voltage terminals, a CAN bus interface, and a display.

Module Internal Structure

Each LT‑P1 module contains 16 series LFP cells (1P16S), managed by a BMU board. Positive and negative terminals use Anderson or quick‑connect plugs. Guide grooves on the sides allow easy insertion into LT‑S1 cabinet slides. The front panel includes an LED status indicator and a CAN communication port.